There are a number of factors to consider when adding a blast room or abrasive blasting system to your powder coating or painting operation. It doesn’t matter what type of dry blasting system you might be considering, this guide is designed to assist reply your questions and plan in your success.
Note: Although unusual, wet blasting systems, also known as slurry blasting systems, are generally used. This article focuses on dry blasting systems, significantly those designed for handbook blasting by one or more operators inside a walk-in measurement steel enclosure.
Part 1: The Blasting Enclosure
Before deciding on a blast room, it’s best to familiarize yourself with among the features frequent across most manufacturers. Nearly all blast rooms characteristic a sq. roof design instead of hip-type roofs. The square roof construction allows for more operator movement, easier load-in and load-out, and has better lighting. Light gauge hip roof models – which are sometimes the cheapest on the market – might not provide the durability and usability you are looking for.
Wall and roof panels are usually available in thicknesses that range from 18 to 10 gauge or thicker. As a general rule, the heavier the wall thickness, the higher the cost. Everybody desires a heavy duty blast room, however heavier development often offers no real benefit because high-wear areas are typically covered by rubberized shielding.
Blast rooms are commonly equipped with a moderate number of multi-tube fluorescent light fixtures and have safety glass with the intention to meet code.
Upgrades To The Blasting Enclosure
While there isn’t a lot to upgrade when it comes to the cabin of standard blast rooms, the door design is one space of the cabin’s building the place upgrades are typically worth the cost. The most importantity of professional-grade blast rooms include standard swinging doors with louvered openings. Premium models might characteristic perforated doors with adjustable splash shields to keep spent media inside the blast room while allowing contemporary air to be drawn into the enclosure. Ruggedized cloth or rubber roll up doors may be requested at an additional cost. They assist reduce the amount of shop space required.
A typical blast room ships with one full-width, full-height door set, and will have one or more separate personnel doors. Some producers provide a curtain wall or curtain door option to reduce cost, however these configurations aren’t widespread with most shop owners because they don’t provide as a lot containment as other designs.
Get The Proper Dimension
Make positive the blast room is the best size. Many of the considerations we outlined in our powder coating oven size guide will probably be applicable here, however make certain you give your components and your operator loads of room. For instance, if the elements you want to blast are very tall, consider adding some additional height to the cabin so you won’t continually be blasting into your light fixtures or the unprotected ceiling surface. Also, if the part you want to blast takes up the keyity of the cabin, give your operator extra width and size to safely work across the part without standing in a stream of blasting media bouncing back towards him.
Part 2: Blast Pot
The blast pot (also referred to as a blasting pot, pressure pot, pressure vessel, media blaster or portable blaster) is the appliance that does the actual blasting. There are a number of blast pots on the market, however all of them work essentially the identical way. A blast pot is a pressurized container with a hose and spray nozzle attached. Abrasive media is loaded into the blast pot and sealed air-tight. Once sealed, the media is pressurized utilizing compressed air. A valve on the end of the hose is controlled by the operator. When the valve is opened, compressed air forces the media to journey down the hose and spray out the nozzle.
If you have any issues pertaining to the place and how to use custom blast rooms, you can call us at the web page.